Budget Studio Lighting: A Home Flash Setup for About €43
Lots of people assume a home photo studio costs a fortune. That's true if you insist on professional studio lights, which beginners usually can't afford. So today I explain how to buy a simple flash for about 60$ and adapt it for shooting in a home studio. The guide will also help anyone who needs an extra studio light on a tight budget.

Overview
Key facts
- Andrejs Zavadskis' 2009 guide explains how to turn an inexpensive camera flash into a home studio light for roughly 60 dollars.
- His suggestions are the BY-24ZP flash at about 18 dollars, or the GN32M, which has adjustable power, at 58 dollars.
- If a flash has no power control, the light can be managed through its distance from the subject, through reflectors, or with homemade grey filters cut from translucent folders.
- To fire the flash he lists an optical slave trigger at about 12 dollars or radio triggers at 17–18 dollars.
- Because optical slaves can fail outdoors in strong sunlight, he recommends a radio trigger.
Why a Camera Flash?
For home use there's no need for an expensive studio strobe – a camera flash will do, and any camera flash can be mounted on a stand. Its biggest advantages are its small size, compactness, independence from 220V mains power and low price. Its biggest drawbacks are that it can't give continuous light and that it is low-powered, yet for shooting indoors, in daylight and at night that output is perfectly adequate. In bright midday sun things get harder, since the power may fall short; in that case use the flash without any diffuser and as close to your subject as possible.I'll assume you are already a fairly experienced user with a digital SLR and a tripod. Beyond that, you will need the following:
The Flash

First, a light source. The cheapest one I've come across is this model: BY-24ZP Automatic Electronic Flash. At 18$ including delivery, it is a true bargain. Its only weakness is that the power can't be adjusted. As I said, the aim of this article is to show the cheapest route, so you'll have to accept a few shortcomings and find ways around them. The missing power control can be worked around with a few tricks. The first is distance: the farther the flash is from the subject, the less light reaches it. When you need full power, I suggest silver diffusers or none at all; when power isn't an issue, white diffusers work well. You can also cut the output with translucent grey folders (sold in stationery shops) by cutting caps of the right size from them to fit over the flash. These homemade grey filters soak up part of the light. You can stack several, but make sure the flash doesn't overheat – give it some air. I prefer modifiers that the light passes through rather than ones it bounces off. If this particular flash is out of stock, you'll find others, slightly more expensive, in this online store.
If your budget stretches further, consider this model with adjustable power: GN32M Rated External Camera Flash for 58$. These are the most basic flashes, with no TTL modes, and I recommend using them the way I describe here. If you're after a flash for reportage work, though, they won't do the job.
Reflector or Umbrella

On a tight budget you can manage without a reflector: just bounce the light off a white wall or ceiling. If you're handy, build a panel from polystyrene foam or another rigid white material and aim the flash at it, so the light bounces back onto your subject. If you'd like something easy to carry, though, buy reflectors made for photography. The two cheapest I've found online are the Translucent Flash Reflector Umbrella for 7$ and the Silver Flash Reflector Umbrella for 10$.
Flash Bracket
You'll also need a bracket to hold the reflector and the flash: the
Camera Flash Mount (Hot Shoe) for 7$ or the slightly better
Flash shoe for 9$.
There's also this
kit, which comes with a reflector.Firing the Flash in Sync
Next, the flash has to fire in sync with the camera from a distance.
A long cable is the cheapest solution, but flashes use different connectors, and the models mentioned above have none at all, so you'll need an optical slave:
Remote Slave Trigger for 12$. Set the camera's built-in flash to manual mode at its lowest power and let it fire the slave. The slave has a small sensor that detects the pulse of light from the built-in flash and signals the external flash to go off. It's a great solution if your camera has a pop-up flash that can be switched to manual mode. Outdoors in daylight, however, it won't work,
because the sun is too strong for the sensor to pick up the flash.Going Wireless: Radio Triggers
To make life simpler and stop worrying whether the flash will catch the sync signal, I'm adding one pricier item to our budget kit – a radio trigger:
Radio Slave Flash Remote Trigger for 17$ or
Wireless Flash Trigger with Remote for 18$. Both do the same job and differ only in design: the second is aimed mainly at camera flashes, while the first is also easier to hook up to studio strobes. If money is tight, the optical slave alone will do, but then the camera's built-in flash has to be set to manual mode.Cables and Connectors
When pairing radio triggers with sync connectors, check carefully which plugs each part has and what's included in the box, because there's always something extra you'll have to buy.
With the first trigger, cord no. 4 runs from a 2.5mm Male to a PC Male plug, whereas cord 2 ends in a 3.5mm Male plug. So you'd need adapter no. 3,
a 3.5mm Female to 2.5mm Female, but I couldn't find one anywhere. Instead, we'll replace adapter no. 3 with two adapters:
3.5mm Male to 2.5mm Female Audio Adapter and a 3.5mm Female to 3.5mm Female (it looks just like no. 3), sold in Rimi supermarkets and other shops (where you can also find the first cord).
The second trigger may raise a similar issue, but as I haven't had it in my hands, I can't say for sure.

Strobists
Some professional and amateur photographers light their everyday work with nothing but camera flashes. They call themselves strobists. They have adapted their flashes to every situation imaginable and built or bought all sorts of accessories – reflectors, attachments, modifiers and more. One of the best strobist resources is
http://www.strobist.blogspot.com.
There you'll find tutorials, the latest gear for strobists, behind-the-scenes looks at professional shoots and plenty more.
Among the best-known professional strobists is
Joe McNally.
Summing Up
So that's a solid way to start working at home with a single light for about €43 and still get studio-quality photos. You can make backgrounds yourself – have a look around DIY and building-supply stores; a big roll of foil, for example, makes a good backdrop. Later on you can add reflectors, more lights and all kinds of accessories.
Once you've bought everything, it's time to learn. The internet is full of
video tutorials and written
tutorials.
From there on, it all comes down to your imagination and creativity.



Comments 23
Leave a comment
Questions, corrections and your own experience are welcome. Your e-mail is never published.