DIY Digital Photo Frame from an Old Laptop for About €30

Here's how to build an impressive digital photo frame on a tiny budget – one that can show not only photos but also video reels and other presentations. My 17-inch frame cost about 30 euros.

Finished DIY digital photo frame on an easel, showing a city skyline photo

Overview

Key facts

  • Andrejs Zavadskis shows how he turned an old laptop and an Ikea frame into a 17-inch digital photo frame for roughly 30 euros.
  • The donor was his first ever laptop, an old Fujitsu Siemens in use since 2004: he detached the LCD screen and concealed the computer behind the frame.
  • He used an Ikea Ribba 50x70 cm frame priced at 9.99 euros and cut a made-to-measure white mat from paper bought at Baltic Paper.
  • Windows was configured to sign in by itself and launch a slideshow, although the ageing processor couldn't cope with Full HD video.
  • His advice is to make sure a second-hand laptop has enough power; the cheapest ones on the classifieds site ss.lv went for about 22 euros.

Overview

 

How It Started

For an exhibition with an interesting concept, I also needed to show how a photo slideshow is made. A TV didn't suit the theme, and neither did an ordinary digital frame. Then I remembered an old 17'' laptop tucked away somewhere: its battery had died long ago, but the machine itself still ran – slowly, yet reliably. That gave me the idea of mounting the laptop screen in a picture frame and hiding the computer inside it.
I built it in a rush, so the parts inside aren't fitted with great precision and the materials aren't ideal – I simply used whatever I had at hand. With more time, all of it could be done more neatly and with more thought.
A tablet could stand in for the laptop, but most tablets have small screens, and the larger the screen, the more striking the frame looks.
If you don't have a spare laptop, you can pick one up quite cheaply on online marketplaces such as ss.lv, a local classifieds site, where the cheapest laptops go for as little as 22 euros. The frame I used came from an Ikea store and set me back about 10 euros.

The Laptop

This is the old Fujitsu Siemens laptop – the very first one I owned, in use since 2004 :)

Old silver Fujitsu Siemens laptop with the lid closed  

Everything I didn't need had to go, so I unscrewed the lot.

Laptop turned upside down with its bottom panels unscrewed, exposing the motherboard

With the surplus parts removed – weight is what counts here.

Partly stripped laptop with removed parts and screws around it

The aim was to take the laptop apart just far enough to separate the LCD screen from the computer itself, i.e. the motherboard, so that the computer could be hidden behind the frame.

Opened laptop at the start of separating the LCD screen

LCD panel detached from the laptop base

Detached laptop LCD panel showing a BIOS screen during testing

Next comes fixing the LCD screen to the backboard of the frame. Measure the centre carefully and make holes for the cables.

LCD panel placed in the centre of the frame backboard

The Ikea Ribba frame, 50x70cm, priced at 9.99 euros. In Latvia it is sold through Ikea resellers, but I'd suggest a trip to the Ikea in Lithuania at some point, or waiting until 2018, when a store is due to open here too.

Ikea Ribba 50x70 cm photo frame with its original insert

Both the screen and the computer get warm, so to keep the frame from overheating over time, I fixed foil to the spots that should, in theory, get hottest.

Aluminium foil taped to the backboard as heat protection, with laptop parts nearby

Foil-covered frame backboard seen from above

The LCD panel went on with a hot glue gun.

Hot glue gun in hand next to the LCD panel on the backboard

Gluing the LCD panel to the backboard with a glue gun

Close-up of hot glue being applied along the edge of the LCD panel

Pressing the LCD panel into place while gluing it

LCD panel glued and taped onto the backboard

Not everything works on the first attempt: somewhere during the disassembly I connected or disconnected the video cable the wrong way.

Holding up the backboard while the LCD shows coloured stripes from a video cable fault

When I lifted the backboard, I realised the computer was too heavy for it and the structure needed extra support. So I drilled some holes and strengthened it with a couple of boards.

LCD side of the backboard after reinforcing it with boards

The reverse side.

Foil-covered back of the backboard with the reinforcing boards

For speed, I fixed the computer in place with clamps.

Laptop base clamped to the back of the frame

LCD on the backboard showing the computer boot screen

LCD on the backboard showing the Windows XP start-up logo

LCD on the backboard showing the Windows XP welcome screen

The original mat (the decorative white border around the picture) didn't fit, so I bought plain white paper from Baltic paper and cut out a window matching the laptop screen.

Cutting a window in white paper for a new mat

Fully assembled, the front looks really smart and presentable.

Assembled digital photo frame from the front, displaying the Windows XP logo

The back is far less pretty, but nobody gets to see it :)

Back of the finished frame with the laptop and cables exposed

The 17'' digital photo frame at work.

Digital photo frame showing a photo at the exhibition, next to framed prints

Exhibition hall with prints on easels and the digital frame among them

I also had to adjust a few Windows settings so that the computer signs in on its own, closes everything it doesn't need and starts the photo slideshow. Pressing the power button shuts the computer down properly, and when it's switched on, nobody has to touch anything – everything starts up automatically. Video playback caused some trouble, as the computer and its processor were too old for modern Full HD files, so I had to rework the slideshow quite a bit to make it lighter on resources. If you buy a used laptop, check that it has enough power for what you need.

The Result

And that's how I put together a 17'' digital photo frame in no time for about 30 euros (counting the cheapest laptop from ss.lv). My next idea for a similar conversion is a 4k monitor or TV paired with a tiny Raspberry Pi computer – I'm just waiting for 4K screens to get cheaper.

Next frame

Keep reading

All stories

Photography Questions Answered on Video: Send Yours In

I'm planning an open day at my studio soon, when anyone can drop by to chat about photography and life, get to know me and say whatever is on their mind. Before that, I'd like to record a short video answering your questions.

Nike Store Photo Shoot: Behind-the-Scenes Video

I was recently commissioned to shoot new pictures for a local Nike store and a booklet design. Shortly beforehand I had bought a budget video camera, so that I could record my shoots and share the footage here with you.

Comments 5

  1. Andrejs Zavadskis#5
    My photo frame worked for a month at the exhibition and nothing bad happened. The good thing about laptops is that they shut down if they overheat. Also, after taking apart the case it started to "breathe" better. The main thing is to separate the foil contact points with wood/paper/cardboard for extra safety.
  2. Jānis#4
    Excellent, work Andrej! I have at least 3 computers which I'd gladly modify like this, but I'm a bit worried whether they can really catch fire from overheating...and whether it's safe to leave the house/office room unattended (even during lunch)...?
  3. Lunis#3
    Could be stylish in the kit with the thick frame. Which part will have big eyes blinking at the moving photographer:)
  4. juris#2
    The final result is quite good, although I assume the TN panel does not look very good, especially from the side. On slow PCs the EXE slideshow file works well (Photodex ProShow).
  5. Valts#1
    Will be a reason to throw out the old portable one

Leave a comment

Questions, corrections and your own experience are welcome. Your e-mail is never published.

(email will not be published)
Links are not allowed in comments
four plus one =* (in words)