Home Photo Printing: Make a Mounted A4 Gift in 30 Minutes
A friend's or girlfriend's birthday is coming up and you haven't had time to think of a present? Sometimes a photo has to go onto paper and into a frame within the hour, ready to hand to someone close. In this first part of the series I show how to print a picture at home quickly and as cheaply as possible, and turn it into something presentable.

Overview
Key facts
- In this 2008 guide Andrejs Zavadskis explains how to print an A4 photo at home and mount it as a gift, fast and on a small budget.
- His printer was the Epson Stylus Photo R220, about €71 in 2008, and ink worked out at about €1.40 per A4 print.
- Rather than shop-bought frames, he mounts prints on 5 mm white board from the Baltijas Papīrs store, which leaves a 10 cm border around an A4 photo.
- The print is fixed with a double-sided adhesive sheet and can be covered with laminating film; air bubbles must be avoided, one reason he favours matte paper.
- From start to finish it takes about 20-30 minutes and costs about €3.50 per mounted A4 photo, not counting equipment and labour.
Overview
Printing the Photo
A4 is both the cheapest and the biggest format for this purpose; a print shop anywhere will charge about €0.70–1.40 for one. A photo frame adds roughly €2.80, so a framed picture comes to about €4.30. Sadly, printing at home won't save you money, but sometimes speed is worth paying a little extra for when you need something here and now. For that reason I went for the cheapest photo printer that still does a reasonable job: the Epson Stylus Photo R220, at about €71. It is a photo printer with 6 cartridges, one for each colour, and another big plus is that it prints straight onto CDs and DVDs in quite good quality. Each cartridge costs about €15.60 (about €94 for the full set), but you can get them cheaper here (about €78 including delivery). A set lasts for roughly 50 A4 photos, so ink works out at about €1.40 per A4 print. As for paper, I recommend genuine Epson papers, which give the best results. My favourites are Epson Matte Paper (about €14 for a pack of 50 sheets), Epson Glossy Photo Paper (about €28 for 100 sheets) and, best of the glossy range, Epson Ultra Glossy Photo Paper (about €14 for 15 sheets). You can buy them at Elkor or from local online shops. It's good that you can choose between cheaper papers (about €0.30–0.70 a sheet) and expensive ones (about €1.40). In short, the cheapest way to print an A4 photo at home costs about €1.40, and the most expensive about €2.80.
The Mount
Personally, I'm not a fan of the ready-made glass frames and the like sold in shops. If you do like them, Tiimarii, Jusk or Novalux sell simple frames at low prices.Because those frames aren't for me, I head to the Baltijas Papīrs store in Riga (Ģertrūdes Street 23) and buy 5mm-thick white board in a 50x70cm sheet for about €2.80 (black costs about €4.30). They will also cut it in half for you on the spot, which gives you two mounts, or passe-partouts, of 35x50cm each for about €2.80. An A4 photograph measures 20x30cm, so it ends up with exactly 10cm of board around the edges, which looks rather good.

Fixing the Print to the Board
For a neat bond between print and board, Baltijas Papīrs also sells double-sided adhesive sheets (about €2.80 for an A3 or A2 sheet), which comes to about €0.30 per A4 photo. If you want to shield the picture from scratches, moisture, sunlight and dust, add laminating film. The Kviller store on Kr. Barona Street 136d sells it by the metre (about €2.80 per metre). Think of laminating film as an oversized sticky tape that you simply smooth over the photo. It comes in glossy and matte versions. I rarely use it, because the glossy kind makes the picture shiny and reflects part of the room. Matte film is a little better, but it "eats" the colours of colour photos, although it suits matte black-and-white prints well. Getting the photo down perfectly flat with both the adhesive and the laminate is also quite tricky at first: any air bubble that forms or gets trapped between print and film shows up badly on glossy paper, which is why matte photo paper is my favourite.
The Whole Process
Depending on your experience, everything takes about 20-30 minutes. Start by printing the photo on the Epson Stylus Photo R220. Colour prints come out excellent (bear in mind it is a cheap printer, so you can't expect miracles), but with black-and-white images it struggles to produce truly neutral tones, and now and then a faint colour cast creeps in. Next, stick the print to the board with the double-sided adhesive, then laminate it if you wish. In both of these steps take care not to trap any air bubbles; work slowly and don't rush the gluing. Finally, decide how the picture will hang on the wall. The quickest solution is double-sided tape from a DIY store. Alternatively, bend a piece of wire or use a drawing pin to form a simple hook and push one end into the back of the board.Costs and Uses
I prefer white board: next to a photo it looks smarter and doesn't have the cheap feel of budget glass-and-wood frames. So here is what the cheaper version of a home A4 print costs: photo paper about €0.70 + ink about €1.40 + board about €1.40, about €3.50 in total (excluding the printer, computer, electricity and labour). In other words, for about €3.50 and 20 minutes at home you can "produce" a good-quality mounted photograph to give to friends, clients, great models and good customers, or even to show at your own small exhibitions.


Recently I cut that black 0.5 board at home with a paper knife and it was a total mess.... (the foam kind of crumpled in places, holes were left) Somehow it is hard to cut it perfectly, I blame the knife.